Aluminum Alloy Ingots

We produce and supply Aluminum Alloy Ingots. Our ingots act as a raw material which is used in automobiles, electrical & pressure die casting industries etc…

We are supplying many Aluminum Alloys such as ADC10, ADC12, AC2B, AC2C, AK5M2, A3104, A5182, A6063… to a number of famous manufacturers.

We also can produce and supply many other Aluminum Alloys as per customer’s requirements.

Furthermore, Our Aluminum Alloy Ingots are available at very nominal cost.

Capacity: 1000 tons/month.

The Aluminum Alloy Ingots shall conform to following composition:

Alloy

Chemical Composition (Mass %)

Cu

Si

Mg

Zn

Fe

Mn

Cr

Ni

Sn

Pb

Ti

Al

ADC10

2,0-4,0

7,5-9,5

0,3 max

1,0 max

0.9 max

0,5 max

0.1 max

0,5 max

0,2 max

0.20 max

0.30 max

Remainder

ADC12

1.5-3.5

9.6-12.0

0.3 max

1.0 max

0.9 max

0.5 max

0.1 max

0.5 max

0.2 max

0.20 max

0.30 max

Remainder

AC2B

2.0-4.0

5.0-7.0

0.5 max

1.0 max

0.8 max

0.5 max

0.2 max

0.35 max

0.2 max

0.20 max

0.20 max

Remainder

AC2C

3.0-4.5

4.0-6.0

0.25 max

0.5 max

0.7 max

0.5 max

0.15 max

0.3 max

0.15 max

0.15 max

0.20 max

Remainder

AK5M2

1.5-3.5

4.0-6.0

0.2-0.85

1.5 max

1.0 max

0.2-0.8

0.5 max

0.3 max

0.05-0.20

Remainder

A3104

0.05-0.25

0.6 max

0.8-1.3

0.25 max

0.8 max

0.8-1.4

0.1 max

Remainder

A5182

0.15 max

0.2 max

4.0-5.0

0.25 max

0.35 max

0.2-0.5

0.1 max

0.10 max

Remainder

A6063

0.1 max

0.2-0.6

0.45-0.9

0.1 max

0.35 max

0.1 max

0.1 max

0.10 max

Remainder

In addition to above chemical composition, we also do manufacture customized chemical composition as per customer’s requirements.